Basic Info.
Model NO.
DNSFSH03
Package
50PCS/Box, 5000PCS/Carton
Types
Strips/Midstream/Cassette
Shipment
by Air or by Sea
Specification(mm)
Strip: 2.5, 3.0;
Transport Package
Carton
Trademark
Diagnos
Origin
Jiangsu, China
HS Code
3822001000
Production Capacity
1000000 Pieces/Month
Product Description
Human Follicle Stimulating Hormone Detection Kit FSH in Vitro Diagnostic Reagent Test Kit
| The FSH One Step Menopause Test Device is a rapid chromatographic immunoassay for the qualitative detection of Follicle Stimulating Hormone (FSH) in urine to aid in the detection of menopause. |
Details of products
| Model Number: | DNSFSH03 | Brand Name: | Diagnos and OEM |
| Power Source: | Manual | After-sale Service: | Online Technical Support |
| Specimen: | Urine | Format: | Strip Cassette Midstream |
| Accuracy: | 99.5% | Sensitivity: | 10-25mIU/ml |
| Quality Certification: | FSC/CE/ISO13485 | Warranty: | 2 years |
Product Information
Test Procedure
1. To begin testing; open the sealed pouch by tearing along the notch. Remove the test form the pouch.
2. Immerse the strip into the urine with the arrow end pointing towards the urine. Do not immerse past the MAX (maximum) line.Take the strip out after 3 seconds and lay the strip flat on a clean, dry, nonabsorbent surface (e.g., mouth of the urine container).
3. Wait for colored bands to appear. Depending on the concentration of FSH in the test specimen, positive results may be observed in as short as 40 seconds. However to confirm negative results, the complete reaction time (5 minutes) is required. Do not read results after 10 minutes.
POSITIVE: Two lines are visible and the test line (T) is the same as or darker than the control line (C). A positive result indicates that FSH levels are higher than normal and the subject you may be experiencing peri-menopause.
NEGATIVE: Two lines are visible, but the test line (T) is lighter than the control line (C), or there is no test line. A negative result indicates that the subject is probably not experiencing peri-menopause in this cycle.
INVALID: Control line (C) fails to appear. Insufficient specimen volume or incorrect test performance are the most likely reasons for an invalid result. Review the procedure and repeat with a new test. If the problem persists, discontinue using the test kit immediately and contact your local distributor.
Storage and Stability
Packing & Delivery
1.Test in a single pouch with dessicant, then packed in a carton, also can be packed in box. Normally 50pcs/per box.
2. Shipping methods: By sea or by air.
Company Profile
Our Advantages:
FAQ
Q1.What's the method you use to do the test?
A: Colloidal Gold Method.
Q2: What's ur MOQ ?
A: Always, for strip format, the MOQ is 5000pcs. While for cassette format, MOQ is 2000pcs, same as midstream.
Q3: What's ur packing of the tests?
A: If you choose the low cost, we will suggest u the bulk packing to go. Which means 1 test in a single pouch, then 100/40 pouches in a plastic bag, 50 bags in a carton. If u need to sell in pharmacy/chain shop or some countries which have strict requirements about the packing, u can choose to pack in a box, like 100pcs in a box, or even 1 test in a single box.
Q4: What's the main differences when comparing products from different suppliers?
A: You can compare the mainly features of the test: Accuracy, Sensitivity, Specificity, and then the Price.
Q5: How can i distinguish a good test kit?
A: You can judge from the 4facts:
1.Technical data: Such as the accuracy, specificity and sensitivity.
2.Pouch sealing: Tight enough. If the foil pouch is not sealed well, the humidity in circustance will destroy the reactivity of
antibodies labeled on NC membrane. Shelf life will be shorten down.
3. Flow speed: The shorter the better?? NO!! The reaction of antibodies on NC membrane and antigens in specimen usually requires quite a while to work sufficiently. U can refer to the instruction for more accurate time.
4. Background: Good test usually gives clean background after running. If there are red smears in the reading window, it usually caused by bad colloidal gold technology or bad NC membrane. Sometimes, the defect caused false positive result in practice.
Q6: How can I get some samples?
1.We may provide some samples, but the postage and samples fee will be paid by yourself. The post charges and samples fee will be deducted from payment for goods after we bargained on the order .
2. You can give us your collect account (just like DHL, UPS etc) and detail contact information. Then you can pay the freight direct to your local carrier company.
Contact Us
Promise: Great Service is our mission, high quality is our obligation! As we strongly believe that QUALITY and SINCERE are very important among business trip !
Welcome to enquiry. Pls feel free to contact us!
Contact Name:Lyn Fang